In this DCS: F-16C Viper video, it’s time to review the basics of the air-to-air radar. We’ll review Range While Scan (RWS), Situational Awareness Mode (SAM), and Single-Track Target (STT) mode. As the product continues development in parallel with the F/A-18C Hornet, we will be adding other radar modes like Track While Scan (TWS) and RAID/EXPAND. We’ll also look at the basics of using the AIM-120 air-to-air missile with radar guidance.

This is based on a USAF F-16C Block 50 circa 2007 and may be a bit different than you are used to.

In this DCS: F-16C Viper video we’ll explore the basics of using the Viper within visual range air combat. This includes the EEGS gun funnel, the AIM-9 Sidewinder, Air Combat Maneuvering (ACM) radar modes, the Helmet Mounted Cueing System (HMCS), and the Dogfight Switch.

This is based on a USAF F-16C Block 50 circa 2007 and may be a bit different than you are used to. This is specifically true with the Dogfight mode HUD as it has changed greatly in later years.

petsild napsal:

No právě… z téhle rychlokvašky budete zklamaný.

petsild napsal:

No právě… z téhle rychlokvašky budete zklamaný.

petsild napsal:
No právě… z téhle rychlokvašky budete zklamaný.

Mira napsal:

Tohle se mi třeba líbí na Hornetu. Že si nastavíš laser kod bomby přímo v letadle. F16 tohle umět nebude, tady by se ta cartridge hodila.

Martin2487 napsal:
Ve skutečnosti se laser kód nastavuje na samotné bombě. Za letu ho tedy nelze změnit.

Known Bugs we are tracking already as of 10-03-2019
Dear Pilots,
These are a list of known issues that are currently open, or fixes have not made it to Open Beta release yet. If you see your bug here, please do not report it, if it's listed here, it is reported.

• All things Damage Model are currently WIP
• Pilot body WIP
• Wing Flex WIP
• DED symbols not affected by reflection
• Seat Shadows in the cockpit not complete
• LAU-3 firing issues after reload
• RWS Search Target Symbols should have history Option
• RWS Search altitude display missing
• LERX vortexes only on-air start
• Some stores alignment issues remain
• Tanker can send ‘transfer complete’ in error
• OBOGS BIT Switch isn't clickable
• MPO check shows nothing
• Depressible Reticle Switch doesn't affect on HUD
• Some MP sync issues remain
• AoA bracket is bouncing around while taxiing under 60kts.
• No animation on the engine inlet fans
• Pilot shows still in the cockpit after ejection
• EQUIP HOT caution light doesn't illuminate after for AIR SOURCE selected OFF
• AWACS Declare not available
• ENG CONT switch doesn't affect nozzle position
• Trying to eject with seat unarmed causes ejection soon as the seat is armed
• HUD IAS delta is too big comparing with info bar
• In certain cases, Afterburner flame overlaps engine nozzle
• HUD velocity switch doesn't display Ground Speed
• AR floodlight and other lights on fuselage doesn't work
• ALT GEAR Handle isn't clickable
• HUD Brightness Control Switch not functioning
• EMER Jettison and GRND jettison not functioning
• Seat adjustment moves POV but not model
• PNEU label is not displayed
• Hook doesn't extend
• Infobar shows wrong flaps value
• Stores Drag WIP

• RWS Search Target Symbols should have history Option
• RWS Search altitude display missing

-- MAN 1
programs[ProgramNames.MAN_1] = {}
programs[ProgramNames.MAN_1]["chaff"] = 1
programs[ProgramNames.MAN_1]["flare"] = 0
programs[ProgramNames.MAN_1]["intv"] = 0.5
programs[ProgramNames.MAN_1]["cycle"] = 0

-- MAN 5 - Wall Dispense button, Panic
programs[ProgramNames.MAN_5] = {}
programs[ProgramNames.MAN_5]["chaff"] = 0
programs[ProgramNames.MAN_5]["flare"] = 1
programs[ProgramNames.MAN_5]["intv"] = 0.5
programs[ProgramNames.MAN_5]["cycle"] = 0