In this video we quickly go over how to employ the AIM-54 on 6 separate targets using TWS Auto, how to change the priority order using Next Launch, and how to employ an AIM-54 Phoenix in ACM mode so that it is Active right off the rail.

In this video we explore all of the different bombing options using both Jester and playing a RIO. We take a look at Computer Pilot (CCIP) and Computer Target (CCRP) modes and then we take a look at Lofting. Enjoy!

The ASL Line issue is now Fixed

DCS MIG-19P stall behavior with the recent FM updates.

DCS MiG-19P Inverted Spin behavior, recovery and Spins during turns

DCS MiG-19 Spin behavior and recovery

LTWS Update

One of the big items we are working on for the Open Beta next week is the introduction of Latent Track While Scan (LTWS). This is a sub-mode of Range While Search (RWS) mode that can be selected from the DATA sub-level (LTWS and MSI).

Even in RWS mode, contacts are in fact track files, but much of the data is hidden unless LTWS mode is selected. When selected, you can:

* Soft lock a contact with a Target Under Cursor (TUC)
* Designate a target to become the Launch and Steering (L&S) track file with airspeed, altitude, and MSI indications. This has a star HAFU symbol.
* A second contact designation becomes the Designated Target 2 (DT2) and has the same information as the L&S but has a diamond HAFU symbol.
* You can TUC a third contact as well.

It will be important to remember that LTWS has rather poor update for the weapons, so it cannot support a weapons launch. To launch, you will need to designate the target again to an STT track. Also because of this, you will want to use a narrower radar azimuth setting and lower bar setting (like 80-degree azimuth and 2 bars). If not, the target updates will be too slow, and tracks may be lost.

On the HUD, the box/diamond indicates the L&S line of sight and the “X” indicates line of sight to DT2.

LTWS will start to form the foundation of Track While Scan (TWS) which will be coming afterwards.

Thanks

Aces_Wild napsal:
* Hostile identification on SA fixed (WIP).
* INS alignment procedure fixed (WIP).

LesniHU napsal:

Proc je u te devatenactky pod "inverted spin" normalni vyvrtka, tusi nekdo?

Guys today an update was released by ED but the changelog was ment to be for the Wed 27th (every 2nd wed) unfortunately we were not informed the update was being brought forward to today.

As a result certain fixes were not updated and we can only send out an apology for this.

Razbam has recently moved to a new internal File structure and increased our internal testing team by 4 to prevent the errors of past changelog glitches reoccurring.

We are so very sorry for the missing changes and we will make sure this DOESN'T happen again.

Thank you for understanding.

Cockpit - Highpolyizing going on on my favourite BO Version ...lot stuff to do

PLANNED FOR 27 MARCH 2019

1- Update to IFF and D/L identification system
2- LTWS
3- JDAM

Next week we plan (not promise) a new Hornet Open Beta update that includes changes to the IFF/datalink identification system and introduction to Latent Track While Scan (LTWS) and the Joint Direct Attack Munition (JDAM). JDAM in particularly is still very much work in progress with large elements to still add. This video is provided to provide you an initial understanding of these systems.

Please also note that the A/A radar is an iterative process from which LTWS will be built upon to create the Track While Scan (TWS) mode and the Azimuth / Elevation (AZ/EL) modes.

Once the AZ/EL page is created, then the various automatic IFF modes will be implemented.

Before you ask… the targeting pod will come after the HARM is complete.

Thanks, and have fun!

- Wags